ISH µPLC iSOC300P

The new micro- control of ISH
μPLC iSOC300P, Art.-Nro. 15001327

Plugin module for integration into your hardware :     

• Very compact form factor
• 85 x 55 mm incl. connectors
• cost-efficient
• flexible
• easy to integrate
• easy to program
• easy to extend
• immediately usable

Plug-in module for integration into existing electronics:

• CPU core Cortex M4 168 MHz
• 1 Mbyte FLASH as program memory
• 192 KByte SRAM integrated as variable memory
• OS FreeRTOS

For high performance applications, extension is possible up to 1 Mbyte SRAM to operate the PLC program with the faster memory.

The following options are provided:

• 1 Mbyte SRAM extension
• Real-time clock
• temperature sensor
• battery
• SD card slot

Capacity:

• 100,000 logical operations (bool, byte, int, DInt) approximately 3.3 ms
• 100,000 real operations approximately 94.5 ms

Interface:
connector 3 x 30 with the following available signals:

• Operating voltage 5VDC +-5%
• temperature range: -40°C to 85°C
• humidity: 5-90% rel, not condensing
• 10 analog inputs
• 2 analog outputs *
• 1 SPI interface, * an alternative to one of the two analog outputs
• 25 digital inputs or outputs, configurable via software
• 1 encoder interface (AB)
• 1 PWM generator
• 2 counter inputs
• 4 PWM inputs or ourputs
• 1 UART interface (TTL)
• 1 USB interface
• 1 CAN 2.0 Interface
• 1 Ethernet interface (OPTION)
• 5 Status LED outputs
• 1 Reset

• Furthermore there are additional ports on the board provided to program the CPU via the integrated serial interface.
• The programming of the PLC is possible by way of the serial interface , via USB as well as by an adapter via Ethernet. As a programming interface Multiprog or Multiprog Express is used.
• The module is also usable for ATEX applications withour ethernet (group 1).
•